Washing machine is one of the most essential home appliances without which it wouldn’t be possible to have a hassle-free routine. With the emergence of latest technology and smart home appliances, today we have hundreds of energy-efficient washer options that tend to deliver optimum results in no time. However, just like any other electronic appliances, washing machine isn’t safe from the dangers of damage and power interruptions. 

1__1_.PNG

When things go wrong, it’s worth checking some of the most common problems and immediately call a professional if you haven’t fixed the washer before:

1. Inadequate Water Supply

Always check the door is properly closed and the water supply is connected. Also, make sure the inlet hoses are clear. If all of these things are functioning correctly yet the machine won’t fill with water, you should seek professional assistance to get things resolved.

2. The Drum Doesn’t Turn

3__1_.PNG

Sometimes the drum fixed inside your machine doesn’t turn. There could be many reasons that can cause this including damaged brushes, drive belt issues or a defective motor or control unit. To fix these issues, you’ll need to call a professional technician to determine the root cause of the problem. 

3. Mid-Cycle Interruptions

2__1_.PNG

If your washer stops working during the cycle, that’s possibly because of the timer, heater or the thermostat out of which only timer issue could be resolved by you and that too on a temporary basis. For all other problems, you have to call in a professional to inspect your appliance and fix the issue. 

4. Noise

Present-day washers are usually noise-free. If you hear any unusual sound, you should check for any stuck articles in the drum such as coins. According to the Appliance Repair London, you have to remove the drum paddles to get to those troubling articles. In addition to that, check the drain filter to assure it’s not obstructed. A noisy washer also signifies failed or damaged bearings. You can also check the drums by turning them with your hands when the washer is empty. In case you hear any weird rumbling noise, you should call an expert as the bearings might require replacement.

5. Draining Problem

The draining issues generally means there is some sort of blockage in the filter. First things first, remove water and pull out the drain hose. Put it into the bucket and let gravity do the magic. 

6. The Machine Won’t Spin

Spinning problems are one of the most common yet irritating faults. However, there are some simple and effective ways to get these issues resolved in an inexpensive manner. Many times, the balance sensors get disturbed when you place your clothes unevenly in the spinner. Also, your machine may vibrate if you overload it with more clothes than the suggested capacity. So, you should try to remove some clothes or even them out to fix this issue on your own. However, if this problem persists, call a professional as the brushes may require to be replaced.

7. The Jammed Door

The problems in the drainage system or a defective door lock can make the door of your machine jammed. Opt for manual draining or remove the top of your machine and unlock from inside.

8. Annoying Smell

If you avoid high temperature washes and chemical-based detergents, your machine could have a buildup of bacteria or mold inside. Not only this problem can make your clothes smell bad but can also cause skin rashes or other skin problems. To get rid of this issue, run a hot empty cycle and leave your appliance open for a few minutes.

9. Damaged Clothes

Tears or cuts in your laundry is an indication of foreign bodies in your washer. A severe drum damage can also cause damage to your laundry. Never try to deal with this situation on your own and always call a professional to inspect the damage.

10. Faulty Codes

If your machine is consistently displaying faulty codes, you may need to call in an expert to resolve this issue. The user manual also contains short descriptions of these codes along with solutions. So you can always give this thing a try before calling an engineer.

Your washing machine is a long-term expensive investment. Never try to fix the issues you aren’t too sure about. Professionals are trained and certified individuals who know their work and can fix your machine disorders without causing any further damage.