One of the best ways to protect, look after and maintain the natural look for your stone and the concrete surfacing is through applying a sealant. Now, achieving that look and protecting your concrete and stone surfaces by yourself is easier than ever. Stone and Concrete sealing is the best way to ensure that your surface is protected from the elements, foot traffic, scuffing, stains, and damage.

There are many benefits that come along with stone and concrete sealing, some of these include but are not limited to: increased durability and longevity of your surface, protection, the improved vibrancy of color, enhanced value to your home and much more. 

This article delves deep into why more and more Australians are sealing their own stone and concrete finishing and achieving great results on their own. Here are 6 DIY Steps on Stone and Concrete Sealing: 

1. Clean Your Surface

Before you even start the process of applying the sealant to your concrete or stone surface you must ensure that the surface is thoroughly cleaned. Firstly, any and all oils, dirt, grease, and dust must be completely removed from the surface. Ensuring your surface is clean before applying any type of sealing agent is essential to the adhesion process. If there are any leftover elements remaining on the surface this will leave a weak foundation for the agent to sit on top of and harder for the sealant solution to adhere to. 

2. Remove Any Existing Sealant

Just like the importance of ensuring your surface is clean from any dirt and oils and leftover elements, it is also just as important to remove any existing previous sealant residue. If an altering brand and type of sealant have been applied to your stone or concrete in the past and there is residing residue it can be incompatible and reject the new sealant that you are applying to your surface. Ensure your surface is completely stripped back and cleaned from any leftover substances.

3. Prepare Your Surface

Preparing your surface is essential to the success of your DIY concrete and stone sealing project. For the easiest application and best adhesion for concrete and stone sealing is by applying an etching agent. The process is straightforward, simply apply the solution to the stone or concrete slab and rinse off with water. This will remove any residuals that you were unable to remove yourself through the cleaning process and assist in removing any interference with creating a strong and secure bond between your surface and the sealant. Another aspect you can look out for through the preparation of your DIY project is to access the assistance of building and pest inspection Brisbane for the peace of mind that there is nothing sinister lurking before you dive in headfirst to your project. 

4. Apply Sealant

Now is the fun part - applying the sealant to your stone or concrete surface. The correct method and the use of necessary tools for the job are essential to the success of your project and ensuring you achieve the best results. Concrete and stone sealing 101 start with applying a thin layer of the sealing agent either with a roller or sprayer, making sure that the layer is dispensed evenly across the surface. It is always best to apply a thin first layer and build upon it to get your desired look and result and avoid uneven application.

5. Wait! Allow To Dry

This step is VITAL! Do not touch your surface until the sealant has completely dried and your concrete or stone ready for a second application. This can take up to 12 to 24 hours and your sealant application will present a strong, hardened top layer resin. Be patient and allow for the sealing process to do its job.  

6. Repeat

As previously stated above, adding a thin layer of your sealant agent to your surface and building upon that is the best way to ensure even application. Once you have waited and allowed for the first layer of sealant to completely dry and adhere to your concrete or stone surface, repeat the application process until you have achieved your desired result!

As shown in this article there are many advantages to sealing your own concrete and stone surface and doing it yourself has never been easier!


Jim Pulman has extensive knowledge and experience in Home Building, Construction, and Design. He writes articles in his free time and partners with content creators to share his expertise with the online community