You have realized that your newly built house has a leaky basement. So, you have been busy looking for the finest solution to the problem. Your search has driven you to basement waterproofing as the best solution. However, you are not sure about what to expect from your basement contractor or the waterproofing process as a whole. Because of this, you are a little hesitant to make the call. Well, you should not be. Here are some of the things to expect:

The first thing that a basement contractor will do is to give you an estimate of the project. You need to know how much the repair will cost you before the work can actually commence. Of course, there’s no standard quote as every house has its own problem. Some of the factors that determine the estimates include:

• Cause of cracking

• Source of flooding

• Structural defect

• Waterproofing solution

Once you are offered the estimates, they’ll cover different waterproofing solutions which match your basement problem. Your job is to pick the best option that suits your need. Still, the contractor that you hire will make a recommendation but it’s up to you to decide what you really want. You also need to consider your budget. Some of the best solutions that you may have to consider are:

a) Waterproofing paint: The paint is used to seal cracks that may be the source of basement flooding. 

b) Plastic sheeting: This method serves the same purpose as the waterproofing paint method. The plastic sheet is used to seal the cracks that allow flooding. 

c) Exterior excavation: Here, a low drainage system is installed after the old one is dug out.

d) Water management: Often referred to as interior excavation, water management involves the installation of interior drainage pipes to address hydrostatic issues. Here is how it is done:

• The experts will create a shallow cut around your wall by breaking the concrete that surrounds your basement. 

• They’ll then make a deeper crevice so as to fit corrugated pipes.

• The installed pipes will then be covered with fresh concrete.

• Lastly, a sump pump is fitted to automatically turn on when water is detected in the basement. It will pump out the accumulating water.

e) A dehumidifier: A humidifier is used to pump out the amount of moisture that builds up on your basement.

f) Crack injection: This is a repair solution that suits concrete-poured building foundations and not masonry (bricks, blocks, and stone) types. A filler material (epoxy) is directed into the basement to fix the seepage problem.

Lastly, you should expect your basement contractor to make follow-ups after the seepage is fixed. This normally takes place a few days after the project is completed. A follow-up is done to ensure that there are no problems after the basement waterproofing process. 

If your basement is flooding, you shouldn’t hesitate to call an expert contractor. If you are not sure who to call, just talk to basement contractor McCoy in Milwaukee. You’ll be provided with the right estimate for a perfect waterproofing solution.