Garage door weather stripping is something that a lot of people overlook when they think about what constitutes the perfect garage. Why is it that we spend so much money weather proofing our homes, but never think to properly protect our garages from the elements? The humble garage is definitely something that should be a 100% sealed environment, because many people keep expensive electronics or tools in their garage, not to mention more obvious things like cars, boats, snooker tables, tools and so on.

Garage door weather stripping is the best and only way to protect your assets from the sometimes dangerous weather outside. Not only that, but a good quality garage door seals will keep the warmth in and the cold out during those bleak winter days. A garage set up with a combustion wood heater burning is just about the coziest environment that a man could imagine, and you no doubt want to keep it that way! You also want to keep your energy bills down too if you are heating your garage with a fan that produces hot air.

As far as garage door weather stripping is concerned, you have two main choices when you go to the department store. You can either find garage door weather stripping that has a flange style stripping or you can opt for the bottom door gasket style, which is less common nowadays. Flange stripping is relatively easy to find and install in common garage doors. It can also be applied to old garage doors with existing weather stripping which has deteriorated to the point where it needs to be replaced.

If your garage door has a dedicated channel running along the bottom to hold such stripping, then the process of removing the old and inserting the new will only take you a matter of minutes. If you find yourself in the unfortunate position of having a wooden garage door threshold, then the whole process of installing new garage door weather stripping is a bit more complicated. Before you do anything, you need to make sure that you get the right measurements. If you end up using too much stripping then the garage door won’t close perfectly where it might be too tight or too loose which can lead to gaps.

Initially, you will have to prop up the door with a plank of wood and make sure it is secure so that the door doesn’t close on top of you while you are working on it. You’ll then have to seal the bottom of the door with some sort of sealant to keep the moisture out. Then it is a case of nailing on the new stripping, making sure that you attach it with the thick side pointing downwards.

One more important thing to keep in mind is that you have to use specialized nails as opposed to ordinary ones. If you visit the garage door weather stripping Home Depot (or other local store) section then a salesperson will no doubt be able to point you in the direction of the right nails to use, just ask for the roofing nails section.

For more information on garage door repair and maintains you can visit Canadian Garage Door Repair Calgary Website an overhead repair and replacement services around Calgary, AB